IPS e.max CAD for PrograMill
IPS e.max CAD lithium disilicate is the most commonly used glass-ceramic worldwide*. The material covers a wide variety of indications and combines efficiency with easy handling.
The versatile and reliable lithium disilicate glass-ceramic IPS e.max CAD ensures vibrant esthetic results. Very good light optical properties, in combination with a unique material structure and high strength (530 MPa**), allow beautiful, natural-looking restorations to be achieved.
The high level of clinical evidence with regard to IPS e.max CAD provides assurance and reliability in the production of long-term, esthetic restorations. This results in satisfied patients.
* Based on sales figures
** Mean biaxial flexural strength, R&D Ivoclar Vivadent, Schaan, Liechtenstein
- Veneers (0.4 mm)
- Occlusal veneers
- Partial crowns
- Minimally invasive crowns (≥1 mm)***
- Three-unit bridges (up to the second premolar as the terminal abutment)
*** Long-term clinical experience and high strength together with adhesive cementation make a crown with at least 1 mm thickness possible.
IPS e.max ZirCAD
Choose IPS e.max ZirCAD when high mechanical strength, low wall thicknesses and very high esthetics are required. This material is suitable for the production of monolithic and veneered crowns and bridges for the anterior and posterior regions. Due to a stability of 850 and 1,200 MPa* and high fracture toughness, the wall thicknesses of all-ceramic restorations can be reduced to a minimum. This means more natural tooth structure can be preserved during preparation.
The well-proven concept for the different translucency levels of IPS e.max also applies to IPS e.max ZirCAD.
* Mean biaxial flexural strength depending on the translucency, R&D Ivoclar Vivadent, Schaan, Liechtenstein
- Full-contour crowns and bridges
- Crown and bridge frameworks
- Implant-supported superstructures
IPS Empress CAD for PrograMill
IPS Empress CAD are leucite-reinforced glass-ceramic blocks. They have brilliant light-optical properties. Due to its flexural strength of 185 MPa*, IPS Empress CAD gives all-ceramic, single-tooth restorations a high degree of stability.
The polychromatic IPS Empress CAD Multi blocks have a natural gradation of shade and fluorescence from the dentin to the incisal edge. This gives the restorations a natural appearance, even without additional characterization. Due to their pronounced chameleon effect, the monochromatic HT blocks are ideal for inlays and onlays. The natural brightness value of the LT blocks has been especially perfected for crowns and veneers.
* Mean biaxial flexural strength, R&D Ivoclar Vivadent, Schaan, Liechtenstein
- Inlays, onlays
- Partial crowns
Telio CAD are highly cross-linked PMMA blocks and discs. With this material it is possible to produce temporary crowns, bridges and implant restorations. The industrial polymerization process makes the material very homogeneous. This means Telio CAD can be easily processed. Prior to insertion, you can choose whether the restoration should be polished or individualized with the stains and layering materials of the SR Nexco light-curing laboratory composite range.
Convincing the patient
You can show the patient what the final restoration will look like whilst it is still in its temporary state, as the visual appearance of the material is excellent.
Reducing the amount of rework required
Give your patient a natural-looking smile: with a material which is comfortable to wear, shows hardly any discoloration and has a low affinity to plaque.
- Temporary crowns and bridges
- Temporary hybrid abutment crowns
Tetric CAD is suitable for the efficient production of esthetic single-tooth restorations. The restorations are polished after grinding and then directly seated using an adhesive cementation protocol. Tetric CAD restorations blend in with the residual tooth structure in an optically pleasing manner due to the pronounced chameleon effect, leading to an esthetic result quickly and easily.
- Onlays (e.g. occlusal veneers, partial crowns)